Speed sensor rear2006 toyota camry solara speed sensor location


i have toyota windom 4vz-fe i need locate knock sensor

a23fde5.jpg

Fig. Camry component locations-3.0L V6 MFI 1MZ-FE VIN F and 3.3L V6 MFI 3MZ-FE VIN A


39eefca.jpg

Fig. Camry component locations-3.0L V6 MFI 1MZ-FE VIN F and 3.3L V6 MFI 3MZ-FE VIN A


d9b3a78.jpg

Fig. Camry component locations-3.0L V6 MFI 1MZ-FE VIN F and 3.3L V6 MFI 3MZ-FE VIN A


Hope this help (remember comment and rated this help) Good luck.

Hello mail4rj: My name is Roger and I will help you. Bank 1 sensor 1 means the cylinder head with #1 cylinder located in it. B2S1 is the cylinder head opposite the #1 cylinder. Basically locate the oxygen sensors in front of the catalytic converters and you will have the sensor you asked to locate. Any sensors behind the converters would be wrong. Should you need further help please just ask. Please rate the answer you received. Thank You for using Fix Ya. Roger

remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley

it is located where the lower rad hose connects there are two sensors there so make sure you have the correct one


More: