My Fisher Paykel GWL 15 will only fill if Hot wash is selected. Should I call a service technician? Thanks Glenn


If warm or cold is selected, the machine only hums. There is good cold and hot water supply to the machine. No lights or beeps. I shut down and unplugged the machine for about 10 minutes-- when I restarted on Cold Wash, it ran for about 2 seconds then quit.

NEED TO KNOW WHERE YOU ARE LOCATED. WE ARE AN AUTHORIZED SERVICER AND CAN OBTAIN PARTS FOR YOU.

Try to swap the plugs and hoses to the hot /cold solenoids see if that works the hot valve with cold water if work you need to buy a cold valve.

having the same problem myself i am replacing the soliniod when it get here. in the mean time the hot water runs in normally so i swapped the hoses over on the back and and now i can wash just that the hot is now the cold button

Unplug the machine have someone tilt the machine back and look under the machine for a little fan on a motor give it a turn to see if it spins it might just be sticky or it may need replacing.


More: