How can i reset password in trail camera


Ltl acorn 5210a trail camera iv forgotten my 4 digit password

To reset the password:


Turn unit on and wait for password prompt
Depress the and hold the enter button until camera


switches into 5-digit password mode _ _ _ _ _.
Trail sentry systems will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .


Press enter to confirm 5 digit mode


Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th digit is entered in the _ _ _ _ screen.


Camera will now go into operating mode, and user can now program a new password from the setup mode

Trail Scout and Trail Sentry camera re-programming procedure.
1) Turn unit on and wait for screen to prompt password
2) Press the enter button and hold until camera switches into 5-digit password mode _ _ _ _ _.
Trail sentry cameras will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .
3) Press enter to confirm 5 digit mode (for trail scouts go to next procedure).
4) Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th 0ne is entered in the _ _ _ _ screen.
5) Camera will now go into operating mode, and user can now program a new password from the setup mode

Here is the link for the user manual if you need it; http://inform2.kenwoodusa.com/manuals/KDCMP228.pdf Page 5 shows the reset button, page 19 shows all the security code procedures which have to be followed even after a reset. This site has a few partial methods which might be worth trying for your player but unfortunately no complete solution; http://forum.ecoustics.com/bbs/messages/4/312069.html Sorry but I think it has to be a dealer - if it was so easy there would be no point having security codes at all - Kenwood says; "How do I reset my security code? If you do not know the security code for your unit, you will need to take the unit to a Kenwood authorized service center to have it decoded. The code feature can only be activated when the code has been entered twice, so it isn't accidentally activated. The service center will often require you to provide a proof of purchase as this feature is designed for theft prevention and the proof of purchase will ensure you are the rightful owner of the product. You can locate the nearest service center in your area here, or by calling (800) KENWOOD. Though we try to locate service facilities in local areas for our customers, at times consumers may be required to ship their product to the facility for repair. Once you have had your code reset, please make a note of the code and keep it in a safe place away from your vehicle." Hope this helps - sorry if bad news :)

when yo see the key icon blinks hold enter and then push enter and put in 66214 and the camera mode will come on


More: