How do you replace the lid on aNEC washing machine model NW652


First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.

Look at the section on the cabinet.

Then see the following for how to release the console and pull the cabinet.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131&osCsid=9b19162f839199d33f88dac696ac636c

First, see the Sears parts site for your washer:

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=110.20692000&pathTaken=partSearch

See the diagram (and parts list) for the top and cabinet.

Also see the following for how to release the console and remove the cabinet to gain access to the switch.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131&osCsid=994d701a894fe6b21797914781777f3c


RepairClinic.com (which is good)
espares.co.uk
AppliancePartsPros.com
Try these sites.

the water inlet valve may be blocked you can either remove hoses that are connected to washer and clean screens they may have sedement from hard water also the inlet valve could be faulty they need to be checked or replaced easy to replace to gain excess remove control panel disconect elec. harness
then remove clip pry with screw driver dislodge clip from hole in cabinet tilt cabinet forward and left it off washer you well see the inlet valve you may want to have a repairman replace if you feel uncomfortable to
do it

Go to the manufactures website and download a service manual or ask them about the problem for advice how to deal with it eric


More: